Hardwood Floor Refinishing in North Little Rock, Arkansas
What it costs, and what North Little Rock's housing stock does to the job.
Floor refinishing in a 1975-median city
The median North Little Rock home was built in 1975 and 9.6% of the city’s housing predates 1940. For floor refinishing specifically, that is not background color — it is the thing that decides the job.
The best refinishing prospects in the state are here, and refinishing is mostly labor — which in the lower-cost parts of Arkansas works firmly in the homeowner’s favor. Ask about a screen and recoat before agreeing to a full sand: if the finish is dull but the wood underneath is sound, it costs a fraction as much, takes a day and removes no wood at all.
North Little Rock has similar housing to its neighbor across the river — a 1975 median with 9.6% prewar, in Argenta, Park Hill and Lakewood especially. Enough of it is old enough that checking for a floor under the carpet is worth doing before pricing a new one, because a sound original floor sanded and finished costs about a third of laying new and removes nothing from the house.
What it costs in North Little Rock
Central Arkansas labor runs below the Arkansas baseline, which is why the range below sits under the statewide $3–$8. Installed, materials and labor together:
| Work | North Little Rock range | Arkansas range |
|---|---|---|
| Refinishing existing boards | $3 – $8 a square foot | $3 – $8 a square foot |
An estimate, not a quote. These are planning ranges for Arkansas, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.
Extras are where a North Little Rock job most often moves away from the band: removing the old floor, prepping a plank subfloor, and stairs. The cost estimator prices those separately against your own room.
Questions worth asking before you book
- What is the subfloor, and what does it need? 9.6% of North Little Rock homes predate 1940 and the median build year is 1975, so plywood or OSB is the likelier answer here and a plank subfloor is the exception worth ruling out. How to identify yours.
- Is the old floor coming out or being covered? Covering costs less and is sometimes the safer answer, but it costs you height at doors and at the bottom stair riser.
- What is the cut-and-waste allowance? Ten percent is normal; older or irregular rooms take more, and cuts are labor.
- What did the slab read, and what did the boards read? An installer who measured both has told you more than a classification code could. What Arkansas licenses, and what it does not.