Hardwood Floor Refinishing in Bentonville, Arkansas
What it costs, and what Bentonville's housing stock does to the job.
Floor refinishing in a 2007-median city
The median Bentonville home was built in 2007 and 1.4% of the city’s housing predates 1940. For floor refinishing specifically, that is not background color — it is the thing that decides the job.
Rarely a live option — with most of this housing built since 2000 there is usually no original floor to find. Where a newer house already has hardwood that has dulled, a screen and recoat is almost always all it needs: a day’s work, a fraction of a full sand, and no wood removed.
Bentonville has the newest housing in Arkansas by a wide margin — a 2007 median with 69.2% built since 2000 — so the old-floor question rarely arises: under the carpet there is subfloor, not oak. What does apply is that Benton County is the tightest construction labor market in the state, which puts the labor half of any quote at the top of the Arkansas range while the material half costs what it costs anywhere. On a labor-heavy job like tile or stairs that gap is worth two quotes rather than one.
What it costs in Bentonville
Northwest Arkansas is the Arkansas labor baseline, so the range below matches the statewide $3–$8. Installed, materials and labor together:
| Work | Bentonville range | Arkansas range |
|---|---|---|
| Refinishing existing boards | $3 – $8 a square foot | $3 – $8 a square foot |
An estimate, not a quote. These are planning ranges for Arkansas, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.
Extras are where a Bentonville job most often moves away from the band: removing the old floor, prepping a plank subfloor, and stairs. The cost estimator prices those separately against your own room.
Questions worth asking before you book
- What is the subfloor, and what does it need? 1.4% of Bentonville homes predate 1940 and the median build year is 2007, so plywood or OSB is the likelier answer here and a plank subfloor is the exception worth ruling out. How to identify yours.
- Is the old floor coming out or being covered? Covering costs less and is sometimes the safer answer, but it costs you height at doors and at the bottom stair riser.
- What is the cut-and-waste allowance? Ten percent is normal; older or irregular rooms take more, and cuts are labor.
- What did the slab read, and what did the boards read? An installer who measured both has told you more than a classification code could. What Arkansas licenses, and what it does not.