Hardwood floor refinishing cost in Arkansas
Roughly a third of the cost of replacing — and in an Arkansas house, often available under the carpet you already have.
The range, and why it is that wide
Installed in Arkansas, refinishing existing boards runs roughly $3 to $8 a square foot, materials and labor together.
Most of the spread inside that range is about how much repair the floor needs before sanding — replacing damaged boards, filling, dealing with old adhesive — and whether you want a site-finished oil or a waterborne finish.
Against $6 to $21 to install new hardwood, refinishing is the cheapest good outcome available in an older Arkansas house. It is only on the table if there is enough wood above the tongue left to sand: pull a floor vent and look at the cut edge before you budget for it.
An estimate, not a quote. These are planning ranges for Arkansas, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.
By city
| City | Labor region | Installed range |
|---|---|---|
| Bentonville | Northwest Arkansas | $3 – $8 |
| Rogers | Northwest Arkansas | $3 – $8 |
| Fayetteville | Northwest Arkansas | $3 – $8 |
| Springdale | Northwest Arkansas | $3 – $8 |
| Conway | Central Arkansas | $3 – $8 |
| Little Rock | Central Arkansas | $3 – $8 |
| North Little Rock | Central Arkansas | $3 – $8 |
| Jonesboro | Northeast Arkansas | $3 – $7.5 |
| Fort Smith | The River Valley | $3 – $7.5 |
| Pine Bluff | The Delta | $3 – $7.5 |
Only the labor half of each figure moves with the region. Material is a national commodity and costs about the same in Pine Bluff as it does in Bentonville.
An estimate, not a quote. These are planning ranges for Arkansas, not a quote. What you actually pay depends on your rooms, your subfloor and the material you choose.